Three in One Ceramic Rubber Composite Panel

Three in One Ceramic Rubber Composite Panel

The three-in-one ceramic rubber compsite panel is a composite wear-resistant material made by combining special ceramic sheets, special rubber, and bolted steel plates through a vulcanization process. It is mainly used for protecting high-wear equipment in industries such as cement, steel, thermal power, and ports.
Send Inquiry
Description
Technical Parameters

Zibo Chenyi Advanced Materials Co., Ltd. is one of the leading manufacturers and suppliers of three in one ceramic rubber composite panel in China, also supports customized service. If you're going to buy CE approved three in one ceramic rubber composite panel made in China, welcome to get quotation from our factory. Quality products and low price are available.

 

The three-in-one ceramic rubber compsite panel 

 

product-866-866

"The three-in-one ceramic rubber compsite panel" is not merely the simple pasting of ceramic pieces. Rather, it is a highly ingenious composite structural material. Through advanced techniques, it firmly combines three materials with distinct properties into a single entity: the surface layer: a high-maintenance alumina ceramic layer; the middle layer: a high-strength rubber buffer layer; and the bottom layer: a high-strength steel backing plate. These three layers achieve molecular-level bonding through special vulcanization or high-molecular adhesion processes, eliminating the drawbacks of traditional ceramic pasting that often leads to detachment. This forms a "rigid-soft integration" perfect protective system..

 

Ceramic Rubber Compsite Panel Size &Thickness 

 

Normal Panel Size

50mm~800mm

The detailed specifications are based on factual conditions

Thickness of Panel

3mm~50mm

Light-load environment ‌ : total thickness ‌20mm‌ (ceramic 10mm+ rubber 5mm+ steel plate 5mm)                                                                           Heavy-duty environment ‌ : total thickness ‌30-35mm‌ (ceramic 20mm+ rubber 5mm+ steel plate 5-10mm)                                                                Extreme working conditions ‌ : the total thickness can be customized to ‌50mm‌, and the ceramic layer can be thickened to 25-30mm to enhance the wear-resistant life ‌

Thickness of Ceramic

5mm~8mm

 
Thickness of Rubber 3mm~5mm  
Thickness of Back Steel  5mm~7mm Under special working conditions, it can reach 12mm

 Remark: Other sizes are available upon your requests.

 

Ceramic Rubber Composite Panel Technical Data Sheet

 

Name

Project

Unit

Index

Rubber

Fracture Toughness

20"C,Mpa %

3.65

Thermal Shock Resistance

ATc,°C

250

Surface Roughness

um

V.9

Density

g/cm3

≥1.2

Elongation

%

500

Tensile Strength

Mpa

18

Shore Hardness

HA

60±5

Peel Strength

Mpa

212

Temperature Range

℃

-40-120

Steel

Carbon Steel Plate

Gpa

Q235B,A36,SUS304

Thickness

3-20

Bolt

High Strength Bolts

4.8Z8.8

Abrasion Resistance

P=74N. n=800rpm. t=30min

0.0005g

 

Category

CY90

CYT92

CY95

CYT95

CY99

CY-ZTA

ZrO2

Al2O3

≥90%

≥92%

≥95%

≥ 95%

≥ 99%

≥75%

/

ZrO2

/

/

/

/

/

≥21%

≥95%

Density

≥3.50g/ cm3

≥3.60g/cm3

≥3.65g/cm3

≥3.70g/cm3

≥3.83g/cm3

≥4.10g/cm3

≥5.90g/cm3

Water Absorption

≤0.1%

≤0.1%

≤0.1%

≤0.1%

≤0.1%

≤0.1%

≤0.1%

HV 20

≥900

≥950

≥1000

≥1100

≥1200

≥1350

≥1100

Rock Hardness HRA

≥80

≥82

≥85

≥88

≥90

≥90

≥88

Bending Strength MPa

≥180

≥220

≥250

≥300

≥330

≥400

≥800

Compression strength MPa

≥970

≥1050

≥1300

≥1600

≥1800

≥2000

/

Fracture Toughness KIc MPam 1/2

≥3.5

≥3.7

≥3.8

≥4.0

≥4.2

≥4.5

≥7.0

Wear Volume

≤0.28 cm3

≤0.25cm3

≤0.20cm3

≤0.15cm3

≤0.10 cm3

≤0.05cm3

≤0.02cm3

 

Main Advanges for the Ceramic Rubber Composite Panel

 

Technical advantages Announcement:
Based on the application case tests, the panel has the following features:
1.Its wear resistance life is more than 10 times that of ordinary steel-lined plates;
2.The rubber layer effectively reduces the impact of materials and minimizes equipment vibration;
3.The bolt-fixed design simplifies the installation process and enables on-site quick replacement.

 

Applications Fields

 

The "three-in-one ceramic rubber panel" is widely used in "key passages" where there is severe wear and impact:

  • Thermal power plant: Coal mill outlet, coarse and fine powder separator, coal powder pipeline, coal discharge pipe, dust removal system, etc.
  • Mining and smelting: Crusher discharge port, beneficiation chute, vibrating feeder, ore transfer station hopper, etc.
  • Cement industry: Slagging chutes for raw materials/sintered materials, cyclone drums, classifier machines, fan casings, etc.
  • Steel and Chemical Industry: Sintering silos, blast furnace coal injection pipelines, slag treatment systems, etc.
  • Port terminal: Large ship unloading cranes' hoppers, stacker-reclaimer chutes.
  • Equipment adaptation: Large components need to be processed in sections and then welded to prevent overall deformation.

 

ZIBO CHENYI Manufacturing Sequences

 

The Manufacturing Process of the Three-in-One Wear-resistant Ceramic Rubber Composite Panel
 

The manufacturing process of the three-in-one wear-resistant ceramic plate made of alumina ceramic, rubber and steel plate requires the integration of material properties and achieves complementary advantages through layer-by-layer composite. The following are the key process steps and key points:
1. Material selection and pre-treatment
Steel plate selection: Choose high-strength low-carbon steel or alloy steel (such as Q235, Q345), with thickness adjusted according to the application scenario (usually 5-20mm).
Surface treatment:

Mechanical treatment: Sandblasting (Sa2.5 grade) or grinding, to remove the oxide layer, oil stains, and increase the roughness (Ra ≥ 50 μm).
Chemical cleaning: Degreasing with alkali → Rust removal with acid → Water washing for neutralization → Drying, ensuring the cleanliness of the surface.
2. Rubber layer composite process
Rubber material: Select wear-resistant and corrosion-resistant types (such as NR natural rubber, NBR nitrile rubber), and add vulcanizing agent and accelerator.
Gluing process:
Gluing method: Hot spraying, brushing or extrusion molding, with a thickness of 1-3mm.
Sulfurization conditions: The flat vulcanizing machine is pressurized to (10-15 MPa), the temperature is 140-160℃, and the time is 20-30 minutes. This process achieves the chemical cross-linking of rubber and steel plate.
3. Composite of Alumina Ceramic Layer
Ceramic Preform:
Use high-purity alumina ceramic sheets (Al₂O₃ ≥ 95%), with a thickness of 3 to 8 mm, and the shape can be customized (hexagonal, square).
The backside is pre-coated with high-temperature inorganic adhesive (such as phosphate-based binder), enhancing the interface bonding.
Paste application process:
Arrangement method: Leave a 0.5 - 1mm expansion gap between the ceramic pieces to prevent cracking due to thermal stress.
Curing conditions: Vacuum hot pressing (pressure 0.5 - 1 MPa, temperature 200 - 250℃, holding for 1 - 2 hours), which promotes the curing of the adhesive layer.
4. Overall post-processing
Edge sealing: Fill the ceramic gaps with high-temperature resistant elastic glue to prevent the medium from seeping in.
Surface strengthening: Optional ceramic surface coating with wear-resistant layer (such as silicon carbide) or laser cladding treatment can be applied.
Quality Inspection:
Adhesion test: Thermal shock test (-40℃ → 200℃ cycle), Tensile test (≥ 10 MPa).
Abrasion resistance test: Tested by Taber abrasion machine, the rate of mass loss ≤ 0.02g per 1000 rotations.
5. Key Control Point
Thermal Expansion Matching: The rubber layer is used to buffer the thermal expansion difference between the ceramic (CTE ≈ 6×10⁻⁶/℃) and the steel plate (CTE ≈ 12×10⁻⁶/℃).
Interface stress: Gradient transition layers (such as adding ceramic particles to rubber) are used to improve interface bonding.
Equipment adaptation: Large components need to be processed in sections and then welded to prevent overall deformation.

 

product-864-864
product-895-895
product-901-901
product-919-919

Why Choose Us

 

1. We a factory with over 20 years experience.
ZIBO CHENYI have advanced isostatic pressing equipment, high-temperature vulcanization production lines and precise testing instruments. Over 10,000㎡ production workshop, with more than 200 employees and workers. With an annual production capacity of 500,000 square meters, our products have been exported to more than 20 countries and regions.

2. Capacity for large order delivery.

We have a strong ability to deliver large orders.

3. Our Certificates
ISO9001, 3 patents, UDEM, TUV.

4. Production Markets
Australia, America, Germany, Japan, Kazakhstan, Italy, Belgium,UK, Denmark and other marketing.

5. Our Service
Various high-quality wear-resistant materials are available for selection, scheme design and production, on-site construction guidance. Very comprehensive after-sales support.

 

Contact Us 

 

Contact us for a quote or customization information.
E-mail: sales@zbchenyi.com
WhatsApp:+0086 13969321722
Contact: Cathy Wang

 

Hot Tags: three in one ceramic rubber composite panel, China three in one ceramic rubber composite panel manufacturers, suppliers, factory, ceramic liner connected by rubber joint, rubber flange for ceramic liner, ceramic filled rubber liner, ceramic paired with rubber liner, ceramic liner of filter, rubber pipe for ceramic liner

Send Message