Zibo Chenyi Advanced Materials Co., Ltd. is one of the leading manufacturers and suppliers of rubber ceramic liners in China, also supports customized service. If you're going to buy CE approved rubber ceramic liners made in China, welcome to get quotation from our factory. Quality products and low price are available.
Wear&impact-resistant Rubber Ceramic Liners for Mining and Minerals

Rubber Ceramic Liners are usually composed of a rubber layer, a ceramic layer and a steel plate. The rubber layer is generally made of rubber materials with good elasticity and flexibility, such as chloroprene rubber, polyurethane rubber, etc., which can absorb impact energy, alleviate impact, and provide a certain sealing effect. Ceramic layers are often made of high hardness and high wear resistance ceramic materials, such as alumina ceramics, which come into direct contact with external media and withstand wear and chemical corrosion.
Rubber Ceramic Liners are widely used in high-abrasion, high-impact applications such as mining, cement, and bulk material handling, where pure ceramic liners may crack and pure rubber liners wear out too quickly.
Rugular Size of Rubber Ceramic Liners
|
Normal Size |
50~800 |
The detailed specifications are based on factual conditions |
|
Thickness of Wear-resistant Liner(mm) |
3~50 |
|
|
Thickness of Rubber |
4~8 |
Remark: Other sizes are available upon request.
Material Composition
| Layer | Material | Function |
| Wear Surface | Alumina (Al₂O₃, 92–95%) or Silicon Carbide (SiC) tiles | Hardness: Mohs 9 (Al₂O₃) / 9.5 (SiC). |
| Bonding Layer | High-strength epoxy or vulcanized rubber | Ensures adhesion between ceramic and rubber. |
| Backing Layer | Natural rubber, SBR, or synthetic rubber (NBR, EPDM) | Provides flexibility and impact absorption. |
Rubber Ceramic Liners Advantages
1. Good wear resistance
The wear-resistant lining of the rubber ceramic lining can reach a thickness of 3~50mm. The ceramic part uses high-hardness materials. After standard testing (P=74N, n=800rpm, t=30 minutes), the friction loss is 0.0005 grams.
2. Good thermal shock resistance
The thermal shock resistance of the ceramic part can reach 250°C, which can withstand drastic changes in temperature. This makes the lining suitable for equipment protection in high-temperature environments, such as cement plants, steel plants and other high-temperature operating places.
3. Good elasticity and impact resistance
The rubber layer of the rubber ceramic lining has an elongation of 500%, which can effectively disperse stress under impact load and vibration environments, reducing the risk of equipment damage. The tensile strength of the rubber is 18 MPa, which further enhances its impact resistance and deformation resistance.
4. Good bonding strength
The peel strength of the rubber part is as high as 212 MPa, which ensures the firm bonding of rubber and ceramic materials and can effectively resist peeling or falling off during operation, thereby improving the overall durability of the product.
Rubber Ceramic Liners Manufacturing Process
Hot vulcanization process: Ceramic sheets or ceramic particles are vulcanized with rubber materials under high temperature and high pressure to form a strong chemical bond between rubber and ceramics. During the vulcanization process, rubber molecular chains undergo cross-linking reactions and interact with active groups on the ceramic surface, achieving a tight bond between the two.
Cold bonding process: First, the ceramic surface is pre treated to improve its surface activity, and then a special adhesive is used to bond the ceramic sheet onto the rubber substrate. This process is suitable for large equipment or special shaped components that cannot undergo thermal vulcanization treatment.
Key Features & Benefits
| Property | Advantage |
| Abrasion Resistance | Ceramic tiles (Al₂O₃/SiC) provide 10–50x longer life than rubber or steel. |
| Impact Resistance | Rubber backing absorbs shock, preventing ceramic cracking. |
| Lightweight & Flexible | Easier to install than steel or solid ceramic liners. |
| Noise & Vibration Damping | Reduces operational noise and material impact stress. |
| Chemical Resistance | Resists mild acids, alkalis, and oils (depends on rubber type). |
Physical Properties
| Parameter | Value |
| Ceramic Hardness | Mohs 9–9.5 |
| Rubber Hardness | Shore A 60–90 (adjustable for impact vs. wear balance) |
| Operating Temperature | -40°C to +100°C (rubber-dependent; ceramics withstand higher temps) |
| Abrasion Loss | ≤0.05 g/cm² (ASTM G65 test, varies by ceramic grade) |
Customization Options
Ceramic Type:
Alumina (Al₂O₃): Cost-effective, Mohs 9.
Silicon Carbide (SiC): Premium wear, Mohs 9.5.
Rubber Type:
Natural Rubber: High elasticity, good impact absorption.
SBR/NBR: Better oil/chemical resistance.
EPDM: Heat/weather resistant.
Design: Flat tiles, curved segments, or molded profiles.
Packaging and Transportation
Reasonable and safe packaging helps buyers maximize savings on shipping costs and time.

Company Introduction
Zibo Chenyi Advanced Materials Co.,Ltd is a high-tech enterprise including scientific research, manufacture and trading.We have a high quality research team and experienced design, production & fabrication team ,also had established a close cooperative relationship with scientific research institutions and institutions of universities and colleges.Our company have been always working on the technology development, product design & manufacture, and site operation for the wear resistant materials to provide customers with good quality products and perfect solution .

FAQ
1. Is it all right to make customer's own brand name?--Yes
2.Are you a manufactuer or trading company?--Manufacturer
3.What about the lead time for mass production?--Depending on the difficulty and quantity of construction, it usually takes 30-50 days.
4.What's your payment term?--30% advance payment and 70% balance before delivery.
5.Where is your company?--Zibo, Shandong Province
6.How soon we can get email response from your team?-Within 24 hours.
7.What is your terms of delivery?--CIF or CFR, FOB, EXW, DDP
Contact information: Sabrina Sun (sales manager)
Mobile/wechat/whatsapp:+8618369949806
Email:sabrina@zbchenyi.com











