Abrasion Rubber Ceramic Liner

Abrasion Rubber Ceramic Liner

The abrasion Rubber Ceramic Liner is made by vulcanizing ceramics in rubber or directly vulcanizing ceramic and rubber on steel plates. It is used as an wear and impact resistance on equipment with large conveying volume, large material and large impact under normal temperature environment.
Send Inquiry
Description
Technical Parameters

Zibo Chenyi Advanced Materials Co., Ltd. is one of the leading manufacturers and suppliers of abrasion rubber ceramic liner in China, also supports customized service. If you're going to buy CE approved abrasion rubber ceramic liner made in China, welcome to get quotation from our factory. Quality products and low price are available.

 

Introduction

 

product-1269-1269

Abrasion Rubber Ceramic Liner are high-performance bushings made of rubber and ceramic composite, skillfully combining the advantages of the characteristics of the two materials. This kind of bushing is specially designed for the key parts of the equipment that are prone to wear and impact, and plays an important role in the fields of mining, metallurgy, chemical industry and building materials, etc. It is widely used in all kinds of conveying equipments, pipeline linings and mechanical parts that are subject to severe wear and tear. Especially in the anti-wear, anti-corrosion, high-temperature performance requirements of special working conditions, wear-resistant rubber ceramic bushings show excellent adaptability and reliability, can effectively improve the service life of the equipment and operational efficiency, for the stability of industrial production to provide a solid guarantee.

 

Rugular Size Of Abrasion Rubber Ceramic Liner

 

Normal Size

50~800

The detailed specifications are based on factual conditions

Thickness of Wear-resistant Ceramic Liner(mm)

3~50

Thickness of Rubber

4~8

Remark: Other sizes are available upon request.

product-1269-1269

Abrasion Rubber Ceramic Liner Technical Data Sheet

 

Name

Project

Unit

Index

Rubber

Fracture Toughness

20"C,Mpa %

3.65

Thermal Shock Resistance

ATc,°C

250

Surface Roughness

um

V.9

Density

g/cm3

≥1.2

Elongation

%

500

Tensile Strength

Mpa

18

Shore Hardness

HA

60±5

Peel Strength

Mpa

212

Temperature Range

℃

-40-120

Steel

Carbon Steel Plate

Gpa

Q235B,A36,SUS304

Thickness

3-20

Bolt

High Strength Bolts

4.8Z8.8

Abrasion Resistance

P=74N. n=800rpm. t=30min

0.0005g

 

Category

CY90

CYT92

CY95

CYT95

CY99

CY-ZTA

ZrO2

Al2O3

≥90%

≥92%

≥95%

≥ 95%

≥ 99%

≥75%

/

ZrO2

/

/

/

/

/

≥21%

≥95%

Density

≥3.50g/ cm3

≥3.60g/cm3

≥3.65g/cm3

≥3.70g/cm3

≥3.83g/cm3

≥4.10g/cm3

≥5.90g/cm3

Water Absorption

≤0.1%

≤0.1%

≤0.1%

≤0.1%

≤0.1%

≤0.1%

≤0.1%

HV 20

≥900

≥950

≥1000

≥1100

≥1200

≥1350

≥1100

Rock Hardness HRA

≥80

≥82

≥85

≥88

≥90

≥90

≥88

Bending Strength MPa

≥180

≥220

≥250

≥300

≥330

≥400

≥800

Compression strength MPa

≥970

≥1050

≥1300

≥1600

≥1800

≥2000

/

Fracture Toughness KIc MPam 1/2

≥3.5

≥3.7

≥3.8

≥4.0

≥4.2

≥4.5

≥7.0

Wear Volume

≤0.28 cm3

≤0.25cm3

≤0.20cm3

≤0.15cm3

≤0.10 cm3

≤0.05cm3

≤0.02cm3

product-800-800

Abrasion Rubber Ceramic Liner Advantages

 

Wear-resistant rubber-ceramic bushings are the centerpiece of industrial protection against complex working conditions with their all-round excellence. In the dimension of thermal performance, it demonstrates impressive resistance to thermal shock. Under atmospheric conditions, the bushing can easily cope with severe temperature fluctuations of up to 250 ℃, through a special material formula and structural design, the thermal expansion and contraction of the stress generated by the clever solution, effectively avoiding the material damage caused by the drastic changes in temperature, in the iron and steel smelting, high-temperature kilns and other high-temperature operating scenarios, can still be stable to play a protective role.


In terms of mechanical properties, its fracture toughness is particularly outstanding. Under the standard test environment of 20℃, the fracture toughness value of 3.65MPa% gives the bushing strong impact and pressure resistance. When encountered with material impact, mechanical collision and other sudden stress, the internal microstructure of the material can quickly disperse the stress, to avoid the emergence and expansion of cracks, which greatly improves the safety and reliability of the key components of the equipment. At the same time, 500% of the ultra-high elongation, so that it has a strong elasticity and toughness reserves, even when faced with large-scale deformation, but also by virtue of the material's own resilience to return to its original state, effectively reducing the risk of damage due to deformation. 18 MPa tensile strength for the long-term stable operation of the bushing to provide a solid guarantee, in the continuous tensile force, can always maintain the structural integrity of the role of the equipment to significantly extend the service life. The service life of the equipment can be significantly extended.


In terms of environmental adaptability, the wear-resistant rubber-ceramic bushing can be called the "conqueror of extreme temperatures". From the extreme cold zone of - 40℃ to the high temperature environment of 120℃, it can maintain excellent physical and mechanical properties, ensuring stable operation in special scenarios such as North and South Pole research equipment and desert high temperature operation machinery. In addition, its density ≥ 1.2g/cm³ characteristics, so that both high rigidity and high strength, in mining machinery, heavy-duty conveying equipment and other high-load operating conditions, still be able to withstand long-term, high-intensity pressure and friction, to maintain stable performance.


In the installation and fixing process, the application of Grade 4.8 and Grade 8.8 high-strength bolts provides double insurance for the solid installation of the bushing. With excellent tensile and shear resistance, these bolts firmly fix the bushing on the equipment, and even in the face of severe vibration, strong impact and other extreme working conditions, they can ensure that the bushing will not loosen and shift, thus building a solid foundation for the efficient operation of the equipment.

product-1269-1269
product-800-800
 
 

Why Choose Us

With more than 20 years of profound accumulation in the field of wear-resistant protection, we specialize in the research and development and production of rubber-ceramic wear-resistant linings and chute protection devices, providing professional solutions for various types of high-wear working conditions. Relying on continuous innovation and process optimization, our products have won wide recognition in the market for their excellent quality, and have received numerous accolades from customers.


As an international standard factory certified by ISO9001 Quality Management System, ISO14001 Environmental Management System and ISO45001 Occupational Health and Safety Management System, we strictly control the whole production process, from raw material selection to delivery of finished products, and always practice high standards and strict requirements to ensure that each product can meet the demanding needs of the industrial field, and create value for our customers with professional strength and reliable service. With professional strength and reliable service, we continue to create value for our customers.

 

Contact Us

Zibo Chenyi Advanced Materials Co.,Ltd. specializes in the production of abrasion Rubber Ceramic Liners, with excellent product quality and technical strength, the liner sold well in Australia, Canada, Russia, Kazakhstan and other markets, and won the high degree of trust of customers around the world. The company provides a wide range of ceramic wear-resistant liner products, with a variety of choices in size specifications and structural design, to accurately match the individual needs of different customers, whether it is a complex and harsh industrial environment, or special working conditions of the application scenario, can be flexibly customized to create a good fit for the customer wear-resistant solutions.

 

Contact us for a quote or customization information.

 

E-mail:bonniejing@zbchenyi.com

Tel/WhatsAPP:+86 13864474677

Hot Tags: abrasion rubber ceramic liner, China abrasion rubber ceramic liner manufacturers, suppliers, factory, Conveyor Roller Rubber Lagging, rubber tubing for ceramic liner, ceramic liner in classifier, ceramic liner inside rubber tubing, ZTA Wear Liner, ceramic liner for screen

Send Message