Structural and Customization Logic
This type of lining plate is commonly referred to as a "three-in-one" lining plate. Through a hot vulcanization process, three layers of material are tightly bonded together:
Surface layer (wear-resistant layer): Typically, 92% or 95% alumina ceramic is used. The Rockwell hardness can reach HRA ≥85, and the Vickers hardness Hv10 ≥1000; this layer is designed to resist prolonged erosion and wear caused by the material.
Intermediate layer (buffer layer): Special-purpose rubber (such as natural rubber or nitrile rubber). Its function is to absorb the impact energy generated when large chunks of ore fall, preventing the ceramic plates from cracking due to direct impact, while also reducing operational noise.
Base layer (fixed layer): A carbon steel plate with pre-installed bolts (commonly Q235/Q345, with a thickness of 3–10 mm). This allows the plate to be securely mounted on the inner wall of the equipment by welding or bolting, and makes localized replacement convenient.
Key parameters during customization
Since this is a custom order, you need to clearly specify several key operating conditions to the manufacturer so that they can determine the appropriate thickness and shape:
Operating temperature: The typical operating temperature range for this type of rubber composite lining plate is generally between -50°C and 100°C. If the temperature of your equipment exceeds this range, the rubber layer will age more rapidly; please inform the manufacturer in advance whether it is necessary to switch to a high-temperature-resistant formulation.
Ceramic and rubber thicknesses: The thickness of the ceramic sheet and the thickness of the rubber layer (typically 2 mm–15 mm) must be selected based on the material block dimensions and the drop height. The greater the impact, the thicker the rubber generally required for cushioning, as well as the more ductile the ceramic (e.g., toughened ceramic or spherical ceramic).
Installation method: Confirm whether your equipment is suitable for welding. If welding is inconvenient or poses safety risks, choose the model with countersunk bolts; if the equipment has an irregular shape, the lining plate must be flexible enough to be cut and bent as needed.
https://www.chenyiceramic.com/rubber-ceramic-liner/cast-ceramic-rubber-lining.html
